PVC Reducing Fitting Concentric Reducer Connector Socket Coupling Blue 20-90mm

Description

PVC Reducing Fitting Concentric Reducer Connector Socket Coupling Blue 20-90mm
This Product Is Widely Used in Garden Irrigation, Farmland Irrigation,
Used in Sanitary Fittings and Other Places.
The Product Is Made of New High-quality Plastic, with Stable Quality and Long Service Life.
Widely Accepted by Users.
〈Product Information〉
👉
Product Name:
PVC Reducing Fitting
Accessories
👉
Material:
Pvc
👉
Product Color:
Blue
👉
Connection Method:
Bonding of pipes and fittings
👉
Application
: Garden Irrigation, Aquarium Needs, Pipe Connection
👉
Packing Quantity:
1/2/3/4/5/8/10
⇒
Features
● the Pipe Wall Is Thickened, and the Inner and Outer Surfaces Are Smooth and Flat. Low Coefficient of Friction
The Water Flow Is Smooth, Not Easy to Be Blocked, and the Maintenance Cost Is Low.
● Odor Resistance, Corrosion Resistance, Low Temperature Sensitivity,
High and Low Temperature Resistance, Good Anti-aging Performance, Normal Service Life
More than 30 Years. Excellent Surface Hardness and Tensile Strength, High Safety Factor.
● the Connection Can Be Glued, the Structure Is Simple, and the Operation Is Convenient
And the Installation Efficiency Is High.
● This Pipe Is Suitable for Drinking Water Pipes, Sewage Pipes, Swimming Pool Pipes, Aquarium Pipes,
Pond System Etc. It Can Be Laid on the Ground and Underground and Installed on the Wall
Or Lie down in an Empty Sewer. in the Open Air, the Pipeline Must Be Frost-proof or Emptied in Winter.
⇒
Connection Method
Gluing (Gluing on the Inside of the Pvc Pipe Fittings and the Outside of the Pipe Fittings,
Insert Within 1 Minute. 15 Minutes to Install and Fix, some Will Be Needed After 2 Hours
Reach Strength and Release Water After 24 Hours. This Is the Best Effect. )
⇒
Specifications:
Dimensions (Large End Inner Diameter × Small End Inner Diameter):
25 X 20mm, 32 X 20mm, 32 X 25mm, 40 X 20mm, 40 X 25mm, 40 X 32mm,
50 X 20mm, 50 X 25mm, 50 X 32mm, 50 X 40mm 63 X 20mm, 63 X 25mm,
63 X 32 Mm, 63 X 40 Mm, 63 X 50 Mm, 75 X 32 Mm, 75 X 40 Mm, 75 X 50 mm,
75 X 63mm, 90 X 40mm, 90 X 50mm, 90 X 63mm, 90 X 75mm
-Please Refer to the Picture for Detailed Dimensions.
20, 25, 32, 40, 50, 63, 75, 90, 110, 160, 200mm Pvc Fittings Such As Elbows, Tees, Caps or Sleeves
The Size Always Refers to the Inner Diameter.
⇒
Dear Customer:
1. If You Need a Large Amount or Other Quantity, We Can Deliver the Goods According to Your Requirements.
Please Contact Us. Thank You.
2. If You Need Other Sizes, We Can Adjust Them.
For Details, Please Contact Our Customer Service.
⇒
The Package Includes:
According to Your Choice.
Other Accessories Are Not Included in the Scope of Supply.
⇒
Feedback:
Feedback Is Very Important to Us.
If You Are Satisfied with the Product, I Hope You Can Give Us a Positive Feedback.
We Request That You Contact Us Immediately Before Providing Us with Neutral or Negative Feedback
so That We Can Satisfactorily Resolve Your Concerns.
⇒
Guarantee:
Not Bad, Good Quality. Buy with Confidence!
We Uphold High Standards and Pursue Excellence, and Strive for 100% Customer Satisfaction!
⇒
Note:
Please Allow Small Errors Caused by Manual Measurement. Thank You for Your Understanding.
The Monitor Is Not Calibrated the Same, and the Color of the Product Shown in the Photo
May Be Slightly Different from the Actual Product. Please Refer to the Actual Product.
PVC Water Supply Pipe Size Description
（Inch, Dn, Metric Comparison Table)
Unit (mm)
Imperial
DN
Metric
1/8"
DN4
φ9.5
1/4"
DN6
φ13.5
3/8"
DN10
φ16.5
1/2"
DN15
φ20
3/4"
DN20
φ25
1"
DN25
φ32
1,2"
DN32
φ40
1,5"
DN40
φ50
2"
DN50
φ63
2,5"
DN65
φ75
3"
DN80
φ90
4"
DN100
φ110
For example (3/4”=DN20=φ25)
On Sep-22-21 at 10:41:49 PDT, seller added the following information: