6E5P-I ◊☆4pcs☆ /6Э5П-И/EL183/ REFLEKTOR Gold Grid

Description

1LO
Т
=4 PIECES BOX ORIGINAL
A track number is sent to track the package!
The customs declaration indicates the minimum cost!
When buying several items, the total amount of delivery is discussed!
◊-MILITARI CHEK
Old quality!
Output tetrod 6E5P-I is designed for wideband amplification of voltage and power in the frequency range up to 200MHz. Lamps with "I" index for pulse operation modes.
Outputs of lamp 6E5P-I:
1.6 heater (heat)
2 anode
3.7 not connected
4.9 cathode and screen
5 second grid
8 first grid
The lamp 6E5P-I is made in a glass finger case with 9 leads and operates in any position. Oxide cathode of indirect filament.
Heat stress 6,3V
Anode voltage 150V
Voltage of the second grid 150V
Electronic current cut-off voltage of the first grid, not more than -1,5V
Voltage of the first anode current cutoff grid, not more than -12V
Filament current 700 ± 40mA
Anode current 35mA
Current of the second grid < 18mA
Pulsed emission current > 6A
Steepness > 24mA/V
Internal resistance 10 Kom
Resistance in the cathode circuit for automatic displacement of 30 ohms
Equivalent resistance of intra-lamp noise 350 ohm
Input capacitance 15 ± 2pF
Output capacity 2.55 ± 0, 35pF
Passing tank < 0.075pF
Cathode capacitance heater < 13pF
Anode voltage 250V
Same thing with a locked lamp 470V
Voltage of the second grid 250V
Stress of the first grid | -100V |
Maximum power at the anode 3W
Maximum power on the second grid 2W
Maximum voltage between cathode and heater + 150V
- 100B
Maximum cathode current 100mA
The maximum current of the cathode is pulse 9A
Maximum resistance in grid chain
500 Of KOhm