4pcs 6P14P-K Matched QUAD (6П14П-К, EL84,) New Unused / Output Pentode Tube

Description

4pcs 6P14P-K Matched QUAD  (6П14П-К, EL84, 6BQ5) New Unused Output Pentode Tube
4pcs (tubes) -  (
With the indication of parameters
)
Matched QUAD
in one lot
Tested, Matched QUAD
DESCRIPTION:
Long-life output pentode - 6P14P-K serves to amplify the power of low-frequency signals to the required level in single-ended and push-pull circuits (cascades) of receivers, amplifiers, and other radio engineering devices. The radio tube has a miniature design, in which its body is a finger glass body with rigid metal contacts on a "button" base.
Main technical characteristics:
• Voltage supplied to the anode in operating mode: 250 V.
• Rated current in the anode circuit: 48 mA.
• Recommended heating voltage: 6.3 V.
• The steady-state current in the heating circuit: 0.76 A.
• Input / throughput / output electric capacitances of the pentode: 11 / 0.2 / 7 pF.
• Product weight without packaging: 20 gr.
Technical characteristics and electrical parameters of the 6P14P lamp:
Filament voltage 6.3 ± 0.6 V
Filament current 760 ± 60 mA
Nominal anode voltage (constant) 250 V
Anode voltage limit 300 V
Anode current 48 ± 8 mA
Cathode current limit 65 mA
The second grid voltage is rated (constant) 250 V
Grid voltage second limit (constant) 300 V
The second grid current is not more than 7 mA
Power dissipated by the anode, limiting 14 W
Power dissipated by the second grid, limiting 2 W
Maximum voltage between cathode and heater (constant) 100 V
Slope 11.3 mA / V
The gain in triode connection is about 20
Internal resistance 30 kOhm
Resistance in the cathode circuit for automatic bias 120 Ohm
Input capacitance about 11 pF
Output capacitance about 7 pF
Pass-through capacitance about 0.2 pF
Glass miniature decoration
DESCRIPTION:
Long-life output pentode - 6P14P-K serves to amplify the power of low-frequency signals to the required level in single-ended and push-pull circuits (cascades) of receivers, amplifiers, and other radio engineering devices. The radio tube has a miniature design, in which its body is a finger glass body with rigid metal contacts on a "button" base.
Main technical characteristics:
• Voltage supplied to the anode in operating mode: 250 V.
• Rated current in the anode circuit: 48 mA.
• Recommended heating voltage: 6.3 V.
• The steady-state current in the heating circuit: 0.76 A.
• Input / throughput / output electric capacitances of the pentode: 11 / 0.2 / 7 pF.
• Product weight without packaging: 20 gr.
Technical characteristics and electrical parameters of the 6P14P lamp:
Filament voltage 6.3 ± 0.6 V
Filament current 760 ± 60 mA
Nominal anode voltage (constant) 250 V
Anode voltage limit 300 V
Anode current 48 ± 8 mA
Cathode current limit 65 mA
The second grid voltage is rated (constant) 250 V
Grid voltage second limit (constant) 300 V
The second grid current is not more than 7 mA
Power dissipated by the anode, limiting 14 W
Power dissipated by the second grid, limiting 2 W
Maximum voltage between cathode and heater (constant) 100 V
Slope 11.3 mA / V
The gain in triode connection is about 20
Internal resistance 30 kOhm
Resistance in the cathode circuit for automatic bias 120 Ohm
Input capacitance about 11 pF
Output capacitance about 7 pF
Pass-through capacitance about 0.2 pF
Glass miniature decoration
DESCRIPTION:
Long-life output pentode - 6P14P-K serves to amplify the power of low-frequency signals to the required level in single-ended and push-pull circuits (cascades) of receivers, amplifiers, and other radio engineering devices. The radio tube has a miniature design, in which its body is a finger glass body with rigid metal contacts on a "button" base.
Main technical characteristics:
• Voltage supplied to the anode in operating mode: 250 V.
• Rated current in the anode circuit: 48 mA.
• Recommended heating voltage: 6.3 V.
• The steady-state current in the heating circuit: 0.76 A.
• Input / throughput / output electric capacitances of the pentode: 11 / 0.2 / 7 pF.
• Product weight without packaging: 20 gr.
Technical characteristics and electrical parameters of the 6P14P lamp:
Filament voltage 6.3 ± 0.6 V
Filament current 760 ± 60 mA
Nominal anode voltage (constant) 250 V
Anode voltage limit 300 V
Anode current 48 ± 8 mA
Cathode current limit 65 mA
The second grid voltage is rated (constant) 250 V
Grid voltage second limit (constant) 300 V
The second grid current is not more than 7 mA
Power dissipated by the anode, limiting 14 W
Power dissipated by the second grid, limiting 2 W
Maximum voltage between cathode and heater (constant) 100 V
Slope 11.3 mA / V
The gain in triode connection is about 20
Internal resistance 30 kOhm
Resistance in the cathode circuit for automatic bias 120 Ohm
Input capacitance about 11 pF
Output capacitance about 7 pF
Pass-through capacitance about 0.2 pF
Glass miniature decoration
DELIVERY:
Perfect and safely shipping. Tracking number is always provided.
We use standard mail service for shipping all tubes/valves.
We ship from Ukraine.
Important note - all international mail services are currently working,
so purchased items will 100% be shipped to your location!
However, some delays in both Standard and Express services may happen.
...
...
...
ANY QUESTIONS?!
Direct in eBay messages and we will help you.