20mm PEX Tube Bend Support, 5Pcs Metal 90 Degree Elbow Bend Support with Spring

Description

Document
Tube bend support is a common pipe fitting. It is used as an auxiliary tool to help the floor heating pipes quickly bend and shape. Prevent floor heating pipes from twisting, shrinking, or loosening and falling off; increasing the reliability and security of floor heating. Suitable for copper, PEX pipes and other pipe connections.SpecificationColor: Silver ToneMaterial: Galvanized IronFit for Pipe: 20mmInner Width: 20MM / 0.79"Size: 120 x 23 x 42MM / 4.72 x 0.9 x 1.65 Inch (L*W*H)Spring Size: 17 x 26 x 22 x 1.8MM / 0.67 x 1.02 x 0.87 x 0.07 Inch (L*OD*ID*TD)Packing List: 5 x Tube Bend Support, 10 x SpringAdvantageGalvanized material, strong and durable, and good load-bearing. Using a bend support to install pipes can avoid scratches during the installation process, improve the reliability of floor heating pipes, and increase the service life of floor heating.When impacted by high-pressure water flow, the floor heating pipe bender can prevent the interface between the floor heating pipe and the water distributor from loosening.It can bend floor heating pipes into reliable shapes, is highly practical, can greatly reduce construction difficulty and work intensity, and improves work efficiency.Instruction1. Prepare the floor heating pipe that needs to be bent, and place it flat on the work surface to keep it stable and not slipping.2. Put the pipe into the opening at the rear of the bend support until a section of the pipe is exposed. At this time, both ends of the pipe should be outside the clamping opening of the bend support.3. Adjust the position of the pipe so that it is within the appropriate bending range, and then fix it with springs on both sides.NOTE:Please confirm the diameter of the installation pipe before purchasing.
20mm PEX Tube Bend Support, 5Pcs Metal 90 Degree Elbow Bend Support with Spring
Tube bend support is a common pipe fitting. It is used as an auxiliary tool to help the floor heating pipes quickly bend and shape. Prevent floor heating pipes from twisting, shrinking, or loosening and falling off; increasing the reliability and security of floor heating. Suitable for copper, PEX pipes and other pipe connections.
Specification
Color: Silver Tone
Material: Galvanized Iron
Fit for Pipe: 20mm
Inner Width: 20MM / 0.79"
Size: 120 x 23 x 42MM / 4.72 x 0.9 x 1.65 Inch (L*W*H)
Spring Size: 17 x 26 x 22 x 1.8MM / 0.67 x 1.02 x 0.87 x 0.07 Inch (L*OD*ID*TD)
Packing List:
5 x Tube Bend Support, 10 x Spring
Advantage
Galvanized material, strong and durable, and good load-bearing. Using a bend support to install pipes can avoid scratches during the installation process, improve the reliability of floor heating pipes, and increase the service life of floor heating.
When impacted by high-pressure water flow, the floor heating pipe bender can prevent the interface between the floor heating pipe and the water distributor from loosening.
It can bend floor heating pipes into reliable shapes, is highly practical, can greatly reduce construction difficulty and work intensity, and improves work efficiency.
Instruction
1. Prepare the floor heating pipe that needs to be bent, and place it flat on the work surface to keep it stable and not slipping.
2. Put the pipe into the opening at the rear of the bend support until a section of the pipe is exposed. At this time, both ends of the pipe should be outside the clamping opening of the bend support.
3. Adjust the position of the pipe so that it is within the appropriate bending range, and then fix it with springs on both sides.
NOTE:
Please confirm the diameter of the installation pipe before purchasing.
Hot Item
Payment
We accept eBay payment.
Please do not email us to ask for other payment option.
We appreciate prompt payment and look forward to your business in the future. Unpaid item will be filed without receiving payment in 7 days from listing ended.
Shipping
Usually we ship your order out within 24 hours in business day.
For shipping and handling charges (S&H) for specific item, please refer to the item listing page for more details.
Please make sure your shipping address is correct. We are not responsible for any loss in transit if a wrong address is provided.
Return Policy
Returns for exchange are permitted and must be initiated by the buyer within 30 days upon receipt.
If you would like to return your product(s) for repair / replacement / refund, please kindly contact our customer service representatives via email for an authorized RMA number. Your returned product(s) will not be processed without a completed RMA.
About Us
We are continually expanding our product selection to better serve your need.
We look forward to providing the best sevice to you - our dear customers, so take a look around our store and find the product that you want. You can put your trust in us!
If you need any help or have any suggestions, please don't hesititate to contact us anytime , we will reply you within 24 hours and try the best to help you.
Description
Policy
20mm PEX Tube Bend Support, 5Pcs Metal 90 Degree Elbow Bend Support with Spring
Tube bend support is a common pipe fitting. It is used as an auxiliary tool to help the floor heating pipes quickly bend and shape. Prevent floor heating pipes from twisting, shrinking, or loosening and falling off; increasing the reliability and security of floor heating. Suitable for copper, PEX pipes and other pipe connections.
Specification
Color: Silver Tone
Material: Galvanized Iron
Fit for Pipe: 20mm
Inner Width: 20MM / 0.79"
Size: 120 x 23 x 42MM / 4.72 x 0.9 x 1.65 Inch (L*W*H)
Spring Size: 17 x 26 x 22 x 1.8MM / 0.67 x 1.02 x 0.87 x 0.07 Inch (L*OD*ID*TD)
Packing List:
5 x Tube Bend Support, 10 x Spring
Advantage
Galvanized material, strong and durable, and good load-bearing. Using a bend support to install pipes can avoid scratches during the installation process, improve the reliability of floor heating pipes, and increase the service life of floor heating.
When impacted by high-pressure water flow, the floor heating pipe bender can prevent the interface between the floor heating pipe and the water distributor from loosening.
It can bend floor heating pipes into reliable shapes, is highly practical, can greatly reduce construction difficulty and work intensity, and improves work efficiency.
Instruction
1. Prepare the floor heating pipe that needs to be bent, and place it flat on the work surface to keep it stable and not slipping.
2. Put the pipe into the opening at the rear of the bend support until a section of the pipe is exposed. At this time, both ends of the pipe should be outside the clamping opening of the bend support.
3. Adjust the position of the pipe so that it is within the appropriate bending range, and then fix it with springs on both sides.
NOTE:
Please confirm the diameter of the installation pipe before purchasing.
Hot Item
Payment
We accept eBay payment.
Please do not email us to ask for other payment option.
We appreciate prompt payment and look forward to your business in the future. Unpaid item will be filed without receiving payment in 7 days from listing ended.
Shipping
Usually we ship your order out within 24 hours in business day.
For shipping and handling charges (S&H) for specific item, please refer to the item listing page for more details.
Please make sure your shipping address is correct. We are not responsible for any loss in transit if a wrong address is provided.
Return Policy
Returns for exchange are permitted and must be initiated by the buyer within 30 days upon receipt.
If you would like to return your product(s) for repair / replacement / refund, please kindly contact our customer service representatives via email for an authorized RMA number. Your returned product(s) will not be processed without a completed RMA.
About Us
We are continually expanding our product selection to better serve your need.
We look forward to providing the best sevice to you - our dear customers, so take a look around our store and find the product that you want. You can put your trust in us!
If you need any help or have any suggestions, please don't hesititate to contact us anytime , we will reply you within 24 hours and try the best to help you.